簡易選型流程

Simplified selection process

明確介質類型→2. 確定溫度 / 壓力 / 管徑→3. 按功能選閥門類型→4. 匹配材質與驅動方式→5. 核對標準與認證→6. 選擇靠譜品牌及采購渠道。

Clarify the type of medium → 2. Determine temperature/pressure/pipe diameter → 3 Select valve type by function → 4. Match material and drive mode → 5 Verify standards and certifications → 6. Choose reliable brands and procurement channels.

選閥門不同的方面來選擇

Choose valves from different aspects

閥門的功能：根據閥門是用于切斷還是調節流體的流量和壓力來選擇，如需快速啟閉則應考慮閘閥、截止閥、球閥、蝶閥等通用閥門，調節流量的可選擇電動或氣動調節閥，調節壓力的選擇減壓閥。

The function of the valve: It is selected based on whether the valve is used to cut off or regulate the flow and pressure of the fluid. If quick opening and closing is required, universal valves such as gate valves, globe valves, ball valves, butterfly valves, etc. should be considered. Electric or pneumatic regulating valves can be selected for regulating flow, and pressure reducing valves can be selected for regulating pressure.

閥門的尺寸：根據流體的流量和允許的壓力損失來決定閥門的尺寸，一般應與工藝管道的尺寸一致。

Valve size: The size of the valve is determined based on the fluid flow rate and allowable pressure loss, and should generally be consistent with the size of the process pipeline.

流體的溫度和壓力：根據閥門的工作溫度和壓力來確定閥門的材質和壓力等級。介質的腐蝕性。根據介質的腐蝕性確定閥門材料。

Temperature and pressure of fluid: Determine the material and pressure rating of the valve based on its operating temperature and pressure. The corrosiveness of the medium. Determine valve materials based on the corrosiveness of the medium.

介質的流速流量：根據介質的流速流量確定閥門公稱直徑。安裝操作。根據安裝操作、管理經濟性確定閥門結構形式。

Flow rate of medium: Determine the nominal diameter of the valve based on the flow rate of the medium. Installation operation. Determine the valve structure form based on installation operation and management economy.

閥門材料：選擇閥門的主要零件的材質，首先應考慮到工作介質的物理性能（溫度、壓力）和化學性能（腐蝕性）等。

Valve material: When selecting the material of the main components of the valve, the physical properties (temperature, pressure) and chemical properties (corrosiveness) of the working medium should be considered first.

閥門驗收：檢查外觀質量和幾何尺寸，查看閥門產品合格證和質量證明書，檢查閥門開啟關閉是否靈活。

Valve acceptance: Check the appearance quality and geometric dimensions, inspect the valve product certificate and quality certificate, and check whether the valve opens and closes flexibly.

本文由良工閥門濟南銷售處友情奉獻.更多有關的知識請點擊:http://www.serviceforo.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message